Wanted/For Sale Listings
Wanted/For Sale Listings
Wanted: Used smooth face forming panels - 3-ft x 4-ft
CFA member is looking for used 3-ft x 4-ft smooth form panels, preferably with an 8-in. hole pattern. Interested in 50-60 or perhaps more. If you have existing inventory you would be interested in moving, contact Irvin at 502-639-5259.
Wanted: 9' Aluminum Forms
CFA member interested in used 9-ft aluminum forms with a 6-12 hole pattern having the vertex-brick face pattern. If you have forms you would like to part with, please contact Central Ohio Poured Walls at madelcol@delcolconcrete.com.
For Sale: 2007 Sterling LT9500
2007 Sterling LT9500, MBE 4000-450HP Motor, Eaton Fuller 8LL, 20,000 LB Front, 46,000 LB Rear, Fassi 330 Articulating Crane, 22’6” low profile body.
There is currently 25,000 miles on the Crane at this time. We are asking $135,000.00. Excellent Condition! See attached photos.
Contact: Renee Bassett
Bassett Masonry, Inc.
(814) 948-5090
For Sale: Forming Products
A CFA member has the following list of forming products, smooth-faced and 6/12 hole pattern. Contact Renee Bassett with any interest at Bassett Masonry, Inc., Elmora, PA 15737; (814) 948-5090 or (800) 354-8201.
Window Bucks: 7 - 41 1/2" x 36"
1 - 62" x 36"
12 - 37 1/2" x 50 1/2"
9 - 50" x 53"
2 - 52" x 62"
2 - 50" x 106"
Columns: 4 - 12" round x 96" high
4 - 12" round x 72" high
2 - 12" round x 54" high
Headers: 1 - 61 1/2" x 19"
5 - 72" x 19"
2 - 96" x 19"
4 - 110" x 15 1/2"
Forms: 9-ft 17 - 2" o.c. W's
8-ft 37 - 2" o.c. W's
4-ft 74 - 2" o.c. W's
2-ft 70 - 2" o.c. W's
For Sale: B.E.P. Gang Forms
2 - 21' x 9' B.E.P. Brick Textured Panels
4 - 18' x 9' B.E.P. Brick Textured Panels
6 - 15' x 9' B.E.P. Brick Textured Panels
6 - 12' x 9' B.E.P. Brick Textured Panels
4 - 9' x 9' B.E.P. Brick Textured Panels w/ 4" slider rails
Forms have Tuff-N-Lite attached ready pins
Accessories:
8 -10 - 12 power taper ties, nominal
Lifting rings
Walk board brackets
For more information, contact Steve Esker by email or by phone at (217) 821-5851.
Download all 12 photos [2.0 MB]
For Sale: 2002 Case CX160 Excavator
5500 hours, 2 buckets
Less than 1000 hours on new Undercarriage and Turbo
$18,000 MikroDigger Full Laser System Attached
http://pdf.directindustry.com/pdf/mikrofyn/mikrodigger-xc2/61805-98159.html
Going out of Business. Absolutely must sell quick. Price reduced $50,000.00 OBO
Prices on Machinery Trader vary from $57000 to $75000 without the Laser System.
This is a very good machine for digging basements at an absolute bargain price.
Jim Ruppel, President
NuWalls Inc.
Cell: (618) 444-6099
Fax : (618) 624-8528
Website: www.nuwalls.com
Email: nuwalls@yahoo.com
For sale: New ConForm Inventory Liquidation
New ConForm Inventory Liquidation – Elbows, Reducers, Clamps, Gaskets, Lock Hubs, Clean Out Balls – Everything Must Go! Huge Savings.
Contact Jim Glazer for details.
Jim Glazer
Elliott Equipment Company jimglazer@elliottequip.com for details.
Phone: (402) 592-4500 Ext. 402
For sale: Aluminum forms for sale
All forms are in excellent working condition. The Brick forms are all Wall ties smooth brick. The smooth forms are mainly tuf-n-lite forms. There are 3', 4', and 8' forms available. Download this Excel file for the complete list.
If you have any questions contact Dave at (717) 532-3039.
For sale: 1996 Westerstar with a 2001 Fassi F330 articulating crane
1996 Westerstar with a 2001 Fassi F330 articulating crane ready to use for wall forming truck has 261k miles runs great.
For more info contact Dave at (717) 532-3039.
Wanted: Smooth-Faced Aluminum FormsCFA member looking to purchase used sets of 9-ft, 8-ft and 4-ft aluminum forms with smooth faces.
If you have forms that fit this description, contact Mike Branson of B&W Foundations, Inc. at (636) 458-3626.
For Sale: 1986 International F2674 with PM Model 23025 crane
This 1986 International F2674 was purchased by our company in 2004.
Download a zipped file containing nine photos of this truck and crane
Cummins LTA l0-240 diesel engine
18,000# front axle with 425 size front tires
46,000# tandems
Fuller RTO11607F 8-Speed transmission
Rear axle ratio 5.38 – Diff. Lock
Heater
Cab painted white
New Telaflex Governor
49” Bed Height
1996 PM Model 23025 hydraulic articulating crane with full hydraulic horizontal reach of 46'-11” and equipped as follows:
Top seat controls
405° rack and pinion rotation
Hydropiloted check valves on all cylinders
Hydraulically extendable outriggers, span 17’-3"
Lifting capacities:
13’-1” = 10,580 lbs.
15’-5” = 9,590
21’-2” = 6,395
27’-3” = 4,300
Overload relief valves
Hydraulic load limit device
SAE/JIC hose and fittings
Load hook
33’-6” = 3,375 lbs.
39’-10” = 2,546
46’-3” = 2,205
Resealed first extension cylinder; checked and replaced wear pads where necessary; installed some new cylinder slides; changed an outrigger lock valve.
New subframe of tubular steel from behind the cab to end of afterframe; used 20'-10" usable (read plate) steel deck flatbed x 102' wide with 2" lip. Used bed in excellent condition, all painted black. Five-foot heavy duly front bulkhead and rear guard to protect the crane, ICC lights, reflectors and rear bumper.
Access ladder and walkway provided for operator into top seal. Remove mount hydraulic tank with 25 micron return line filter, necessary hoses/lines and hydraulic fluid. Crane installed on the afterframe.
Includes hydraulic pump, air shift PTO and necessary boom rests.
For more information or interest call Dan Bromley at (816) 985-5886.